UHMW/PE Roller Sleeves
Spiratex manufactures extremely durable "Slip Fit" roller sleeves from UHMW/PE material in our special ULTREX blend.
They allow
- the product or box the ability to smoothly slide over the roller. This creates a smooth accumulation area that prevents bottlenecks or jams and protects the surface of the roller as well the surface of the product.
- the drive motor to keep from being overtaxed by relieving line pressure
- the roller to remain protected and be in service for many years. You can't break these with a hammer.
- for quick and easy installation.
Standard Stocked Sizes - Most popular
Color: Black • Standard length is 122" or we can cut to length
| Part number | Roller OD | Ultrex Sleeve ID | Ultrex Sleeve OD | Wall |
|---|---|---|---|---|
| 1972286 | 1.90" | 2.00" | 2.375" | .187" |
| 1012719 | 2.50" | 2.625" | 3.00" | .187" |
Other Sizes available
| Part number | Roller OD | Ultrex Sleeve ID | Ultrex Sleeve OD | Wall |
|---|---|---|---|---|
| 1982408 | 1.90" | 2.00" | 2.25" | .125" |
| 1982410 | 2.00" | 2.25" | 2.50" | .125" |
| 1972275 | 3.50" | 3.625" | 4.00" | .187" |
| 1992466 | 3.5" | 3.625" | 4.125" | .250" |
Spiratex manufactures "Press Fit" roller sleeves
All press fit roller sleeves are meant to be "pressed on" by mechanical means for a non-slip fit.
All press fit roller sleeves are quoted and produced based on your requirements
| Part Number | Roller OD | Ultrex Sleeve ID | Ultrex Sleeve OD | Wall |
|---|---|---|---|---|
| 1012761 | 1.90" | 1.89" | 2.098" | .104" |
| 1104204 | 1.90" | 1.89" | 2.375" | .250" |
| 1104191 | 4.00" | 3.98" | 4.50" | .260" |
| 1094106 | 4.00" | 3.95" | 5.00" | .525" |
| 1083954 | 5.00" | 4.950" | 6.065" | .557" |
Call 734-289-4800 for quotations or other sizes.
